Wholesale Commercial Wood Booth Seating, Sectional Sofa Booth
The back panel is a separate insert, so the part that dates fastest can be replaced on its own without touching the leather the room was specified around.
| Type | Wall unit or run end |
|---|---|
| Seat height | 450 mm standard |
| Seat depth | 520 mm |
| Back height | 1050 mm above floor |
| Back detail | Fabric insert, 520 × 480 mm, in a timber frame |
| Upholstery | Leather seat · checked wool-mix back insert |
| Carcass | Dark stained timber, exposed frame and plinth |
| Insert | Removable, hooked into the frame behind the seat |
| Packing | One crate · inserts packed separately and numbered |
| Terms | EXW Foshan or DDP to your address |
Trade enquiries only · EXW Foshan or DDP · replies inside three working days
Replaceable panels in a piece of fixed furniture
Banquettes are usually specified once and lived with for a decade, which is a long time for any fabric to stay in a scheme. Building the back as a fabric insert in a timber frame means the part that dates can be swapped without touching the seat, the carcass or the wall fixing.
The insert is 520 by 480 mm and hooks into the frame behind the seat, so it comes out from the front with the seat lifted. The room can change its pattern in a season without a joiner on site.
Three materials, one piece of furniture
Timber carcass, leather seat and fabric back is three different wear lives in one object. The leather takes the traffic and cleans with a cloth; the timber takes the impact and can be touched up; the fabric takes the least contact and shows the most. Putting each one where it gets the load it can survive is why the split works.
The risk is at the joints, where fabric meets timber. The insert is framed rather than stapled into the carcass, so the fabric edge never touches the timber directly and there is no line of compressed pile to go flat.
Checked fabric and a dark room
The check reads at a distance where a plain fabric of the same colour disappears. In a room with dark timber and low light, that is the point: the back panels carry the pattern and the rest of the booth stays quiet. The risk is at close range, where a large check can look busy on a small panel — 30 mm or smaller is the safer scale for inserts this size.
Any fabric can be specified. The frame and the insert size do not change, so the choice can be made after the sample arrives.
Next in the same range
Send a floor plan, get a priced layout back
Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.