Modern Solid Wood And Metal Bar Table And Chair Set, Outdoor Use
Outdoor specification is mostly about what happens at the joints, because that is where water gets in and stays.
| Set | One bar table · two or four chairs |
|---|---|
| Table top | Solid wood, 30 mm, sealed all faces |
| Height | 1050 mm standard · 750 mm on request |
| Seat height | 750 mm · 450 mm on request |
| Frame | Metal, powder-coated, sealed joints |
| Fixings | Stainless steel |
| Suitable | Covered outdoor · sheltered courtyard |
| Packing | Flat crate · top wrapped separately |
| MOQ | 10 sets |
| Terms | EXW Foshan or DDP |
Trade enquiries only · EXW Foshan or DDP · replies inside three working days
Seal every face or seal none
Timber sealed on the face and left raw underneath absorbs moisture from the underside, which is where the air is dampest and where nobody looks. The result is a top that cups upward with the face in compression. Every face and both ends are sealed here, which costs a few minutes per top and removes the failure.
The same applies to the frame joints: where a steel tube meets timber, a gasket goes between them, so water does not sit in a capillary gap that never dries.
Stainless fixings, again
Zinc-plated bolts are the first thing to fail in a covered outdoor setting, and the failure shows as a rust streak down a leg. Stainless costs a small premium and removes that category of complaint entirely.
Covered outdoor is a specific promise
This set is specified for a terrace with a roof or a courtyard with shelter. It is not designed for direct rain, and the timber needs dry spells between wettings. Where the piece will be fully exposed, the stainless-steel set is the correct answer and we will say so rather than sell this one into a situation it will fail in.
Send a floor plan, get a priced layout back
Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.