Industrial Round Counter Height Bar Table And Stool Set
Counter height is the height that lets a room serve food and drink off the same surface, and it is decided by the gap between seat and top rather than by either number alone.
| Set | One counter table · two or three stools |
|---|---|
| Table top | Round, Ø700 or 800 mm, 30 mm |
| Height | 900 mm standard · 950 mm on request |
| Seat height | 650 mm |
| Frame | Metal, powder-coated, welded |
| Footrest | Ring on the stools at 400 mm |
| Top finish | Solid wood or compact laminate |
| Packing | Flat crate · top separate |
| MOQ | 10 sets |
| Terms | EXW Foshan or DDP |
Trade enquiries only · EXW Foshan or DDP · replies inside three working days
250 mm between seat and top is the food number
Top at 900 mm over a 650 mm seat leaves 250 mm, which is the same gap as a dining table and is what allows a plate to be eaten off comfortably. Push the top to 1050 with the same seat and the gap becomes 400 mm, the elbows come up to the surface and the food stops being usable. That single dimension decides whether a zone can serve a menu.
The round top at 700 to 800 mm seats two comfortably and three at a push, which suits a floor where counter zones are for pairs rather than groups.
The footrest has to move with the height
At 650 mm the natural foot position is around 350 to 400 mm above the floor, so the ring is set there rather than at the height a 750 stool would use. Setting a counter stool with a bar stool's ring leaves the foot hanging and the guest sliding forward within the hour.
Where counter height fits in a room
It is the middle band: lower than a standing bar, higher than a table. Most pubs run all three, with the counter zone along a window or a side wall and the standing zone at the main bar. Keeping the frame family the same across the three is what makes the room read as one scheme.
Send a floor plan, get a priced layout back
Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.