Metal bar table, 1020 mm
1020 mm is the low end of standing height and the high end of perching, which makes it the most flexible number in the range and the hardest to place without a stool sample in the room.
| Top | 600 × 600 mm |
|---|---|
| Height | 1020 mm |
| Material | Steel |
| Colours | Black / white / made to order |
| Shape | Square |
| Pairs with | 700 mm stool |
| Terms | EXW Foshan or DDP to your address |
Trade enquiries only · EXW Foshan or DDP · replies inside three working days
The number between two standards
Most seating is specified at 750 mm stools with 1050 mm tops, or at 650 mm stools with 900 mm tops. 1020 mm sits between them and pairs cleanly with a 700 mm stool, a height that exists precisely because 1020 mm tops do. Get the pair right and a guest can perch for an hour; get it wrong by 50 mm and they sit with their knees against the frame.
For a room that is unsure whether a zone is standing or perching, this is the height that can be either, as long as the stool is ordered with it rather than afterwards.
All steel, and what that means at the base
Steel gives a thin edge and a stiff frame, so the top can be 600 mm square without a visible apron. It also carries cold and noise: a glass put down hard rings, and a steel top in a quiet room is louder than timber. Where the room is loud already, nobody notices.
The base has to be weighted or spread, because a light steel table at 1020 mm walks when it is leaned on. Four legs spread wide enough is the cheap answer; a weighted plate is the stable one.
Next in the same range
Send a floor plan, get a priced layout back
Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.