Light Luxury Retro Orange Leather Booth Sofa For Bar
Welds on a steel frame are a finish question, not a structural one. Ground flush and powder coated, they disappear; left as they came off the jig, they show through the paint within a year.
| Type | Straight run, buttoned back, exposed steel frame |
|---|---|
| Seat height | 450 mm standard · 430 / 470 mm on request |
| Seat depth | 510 mm standard · 470 / 550 mm on request |
| Back height | 1030 mm above floor |
| Back detail | Diamond tufting at 125 mm, 24 mm depth |
| Upholstery | Chestnut contract leather · any colour on request |
| Frame | 40 x 40 mm steel, powder coated black, welds ground |
| Fixing | Floor anchors through the frame feet |
| Packing | One crate per 2.2 m run |
| Terms | EXW Foshan or DDP to your address |
Trade enquiries only · EXW Foshan or DDP · replies inside three working days
Grinding welds is the whole job
Steel shows what is under the paint. Welds left proud and coated over read as a ridge, and the coating is thinner on that ridge than anywhere else, so it is also the first place to break down.
Every joint on this frame is ground flush, sanded to 180 grit, then powder coated at 80 microns. Under a hand along the top rail there is nothing to feel.
Frame as the design
On a timber box, the base is part of the furniture. On this frame, the base is a line, and the eye follows it along the run and up over the end.
That line is why the frame is 40 mm square rather than a flat bar. Square section catches a highlight along its top edge and reads as a drawn line; flat bar just reads as a shadow.
Steel in a wet room
Powder coat on steel is fine in a bar. What it does not survive is a scratch down to bare metal, which then rusts under the coating and lifts it in a ring.
Where the frame sits in a route that takes trolleys, specify the touch-in pen with the order. Five seconds with a touch-in pen at the first scratch is the difference between a frame that lasts and one that goes scabby.
Send a floor plan, get a priced layout back
Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.