Modern Metal High-Top Bar Table And Stool Set
Detachable is the word that matters here: a table that comes apart into a top, a column and a disc ships at a fifth of the volume and can be re-planned without a new order.
| Set | One high table · two stools |
|---|---|
| Table top | Ø 700 mm or 700 × 700 mm |
| Table height | 1050 mm · 750 mm on request |
| Top | Steel, 25 mm, folded edge |
| Joint | Bayonet column · no tools |
| Base | Cast iron disc, 430 mm |
| Stool | Backless, Ø 320 mm seat · 750 mm |
| Finish | Matte black powder coat |
| Packing | Flat: tops stacked, columns and discs separate |
| MOQ | 20 sets · lower on repeat |
Trade enquiries only · EXW Foshan or DDP · replies inside three working days
Detachable joints and where they fail
Every knock-down table fails at the joint between column and top, because that is where the bending moment from a lean lands. Screwed flanges work loose in a season; a bayonet with a taper seats tighter as the load comes on, so it does not develop the wobble that makes a table feel cheap.
The trade-off is that a bayonet needs a machined collar, which costs more to make than three screws and a plate. It is the difference between a table that can be taken apart fifty times and one that can be taken apart twice.
Round and square in one order
The same column and disc take a 700 mm round top or a 700 mm square top, so a floor can mix the two without stock duplication. Round tops suit circulation because there is no corner to walk into; square tops pack tighter against a wall. Ordering both against one base type means a room can be re-planned from one layout to the other by swapping tops.
Finish choice for a working floor
Matte black hides scuffs at the base, which is where every table takes its damage, and it does not show the fingerprint marks a satin finish collects. The steel top is the practical choice over timber for a room where tables get moved weekly, because there is no finish to lift at the edge.
Send a floor plan, get a priced layout back
Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.