American Vintage Round Solid Wood Bar Table And Chair Set
Vintage furniture reads correctly when the frame curves are right, and the giveaway on a modern copy is always the bend radius at the knee.
| Set | One round table · four chairs |
|---|---|
| Table top | Ø 700 mm · 600 / 800 mm on request |
| Top | Solid wood, 30 mm, dark walnut stain |
| Table height | 750 mm · 1050 mm on request |
| Base | Cast iron pedestal, 400 mm disc |
| Chair | Solid wood frame, curved back rail |
| Seat | Padded, leather or contract vinyl |
| Finish | Hand-rubbed dark stain · matt lacquer over |
| Packing | Top, base and column separate · chairs assembled |
| MOQ | 12 sets · lower on repeat |
Trade enquiries only · EXW Foshan or DDP · replies inside three working days
The curve at the knee is what dates a copy
American vintage chairs from the forties and fifties were bent on steam presses with a fixed radius, and the radius is small: a tight curve just behind the knee that supports the sitter without a visible joint. Modern reproductions usually run a wider, softer curve because it is easier to press, and the wider curve is what makes a chair look like a banqueting seat rather than like a period piece.
The frames here are steam-bent to the tighter radius with a glued scarf at the back rail, which is the same construction the originals used. It is slower to make than a cut-and-joined back, and it is the only way to get the silhouette right.
Dark stain over solid wood, not a printed veneer
Dark walnut stain on solid timber takes the finish unevenly across the grain, which is what gives the surface depth under low light. Printed veneer on MDF takes the same tone everywhere, and in a dim room it reads as flat. The trade-off is that solid timber moves: a top of this size will open a hairline at a joint over a dry winter and close again in summer.
Round tables for conversation
Four guests at a 700 mm round table all sit the same distance from the middle, so nobody is on the end of a bench. That is why round tables dominate wine bars: the table is a conversation rather than a service station, and the base leaves the floor clear of legs.
Send a floor plan, get a priced layout back
Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.