Trade supply only  ·  Foshan, Guangdong, China  ·  Since 2006Foshan, China · 2006
Tanner & BellBar & Pub Furniture Send Drawings
Home/Bar Sets/BST-31
Long American solid wood bar table with black metal stools in a pub interior
Bar Sets · model BST-31

Traditional American Solid Wood Bar High Table And Chair Set

Communal seating only works if the table is long enough to make strangers into neighbours and low enough in the middle for a tray to cross without a step.

SetOne communal table · eight backless stools
Table length2400 mm standard · 1800 / 3000 mm on request
Table width700 mm
Table height1050 mm
TopAmerican solid wood, 40 mm, plain-sawn planks
FrameBlack powder-coated steel, 50 × 50 mm
StoolRound seat Ø 320 mm · 750 mm high
FinishClear matt lacquer · matte black frame
PackingKnock-down: top, two leg frames, stools nested
MOQ10 sets · lower on repeat

Trade enquiries only · EXW Foshan or DDP · replies inside three working days

Why the top is 40 mm and not 25

At 2400 mm with only two leg frames, a 25 mm top sags visibly in the middle within a year of service, and the sag shows up as a wobble in the glass rather than as a bent board. Forty millimetres of solid wood on 1800 mm frame spacing holds a straight line under eight people leaning on it. The plank joints are glued and dowelled with the grain alternating, so the top moves as one board rather than opening at the seams.

The trade-off is weight. The top alone is around 42 kg, which is why the leg frames are separate and bolt on with four M8 bolts per side: two people can move the set into a room and build it there rather than carrying it assembled through a door.

Backless stools at 750 mm

Eight backless stools fit under a 2400 mm table because each one takes 290 mm of run rather than the 450 mm a backed chair needs. Losing the back is what makes the communal table work: guests sit at any point along it, and the sightline from the bar stays open across the whole room.

The seats are 320 mm round with a slight crown, so they drain if a glass goes over, and the footring is at 250 mm, which is where a 750 mm stool is comfortable for a long sit rather than a perch.

Traditional proportions, current frame

Traditional here means the table is taller relative to its width and the stools are round rather than square. That reads as an older public house rather than as a works hall, which is usually the point when a bar is being fitted to look like it has been there for thirty years.

Next step

Send a floor plan, get a priced layout back

Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.

Send drawings on WhatsAppAll contact optionsTrade enquiries only · EXW Foshan or DDP