New Industrial Style Solid Wood Bar Table And Chair Set
Industrial style is usually a licence to leave the structure visible, and the honest version of that is a frame that is actually doing the work rather than pretending to.
| Set | One bar table · two or four chairs |
|---|---|
| Table top | Solid wood, 35 mm |
| Table height | 1050 mm standard · 750 mm on request |
| Seat height | 750 mm · 450 mm on request |
| Frame | Black steel, welded |
| Top finish | Matte lacquer, sealed end grain |
| Chair | Timber seat, steel or timber frame |
| Packing | Top and frame in one crate · chairs separate |
| MOQ | 10 sets |
| Terms | EXW Foshan or DDP |
Trade enquiries only · EXW Foshan or DDP · replies inside three working days
Visible structure only works when the structure is real
Industrial style leaves the frame on show, which is fine as long as the frame is the part carrying load. Where a decorative steel leg is bolted onto a timber apron that is doing the actual work, the joint between them becomes a place where the two materials move against each other, and the fixing works loose. Here the steel frame carries the top and the load goes down the legs, so there is nothing hidden behind the visible structure.
The 35 mm top is thicker than a dining top because it is held only at its ends. Thinner tops spanning the same distance between two steel rails will deflect under a person leaning on the middle of it.
Why the end grain is sealed twice
End grain takes water roughly ten times faster than face grain, and on a table it is the edge that gets the spill. Two coats on the end against one on the face is not over-specification; it is the difference between a top that stays flat and one that cups along its length after a wet winter.
Chairs at two heights
The chairs are available at 750 for the bar-height table and at 450 for a floor-height version. Both come in the same frame and seat, so a room that mixes the two heights does not look like two orders.
Send a floor plan, get a priced layout back
Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.