Modern Iron High Bar Stool And Table Set For Clubs
Iron and leather is the pairing that has survived every style cycle, because both materials are repaired rather than replaced and both look better with use.
| Set | Two bar tables · six high stools |
|---|---|
| Table top | 700 × 700 mm · steel or timber, 25 mm |
| Table height | 1050 mm |
| Frame | Iron, 30 × 30 mm, welded |
| Stool | Leather seat and low back · 750 mm |
| Stool frame | Iron, four legs, welded footring |
| Finish | Matte black iron · tan or black leather |
| Feet | Adjustable glides · replaceable |
| Packing | Flat crate · stools assembled |
| MOQ | 15 sets · lower on repeat |
Trade enquiries only · EXW Foshan or DDP · replies inside three working days
Iron stools weigh what they need to weigh
The high stool is a lever: everything above the seat is pushing on a base that is only 400 mm across. Iron at 30 mm square with solid feet puts the weight where it is needed, low and wide, so a guest leaning back on a 750 mm stool does not lift the front feet off the floor. Aluminium of the same section weighs a third and tips.
The trade-off is handling. Iron stools are carried two at a time, not six, and that is a real cost on a floor that gets cleared weekly.
Leather seat height and footring position
At a 750 mm seat with the footring at 260 mm the guest's knee sits at roughly 90 degrees, which is the position the leg can hold for a whole evening. Move the ring to 300 mm and the knee opens; the guest slides forward and the back of the stool stops being used.
Matte iron and cleaning
Matte black iron shows a chalky mark where a cleaning cloth with too much chemical has been used, and that mark is difficult to remove. The finish here is a satin-matte rather than dead flat, which takes a wipe without going patchy.
Send a floor plan, get a priced layout back
Tell us the counter length, the number of covers and the look you want. We come back with stool counts, heights, finishes and a written quotation — usually inside three working days.